Hebei Hankai hydraulic oil seal

5. Reassemble and Test After replacement, carefully reassemble the hydraulic cylinder. Once reattached to the hoist, test its operation without excessive loads to ensure it functions properly.

- O-Ring Seals Circular in shape, O-rings are widely used due to their simplicity and effectiveness. They can accommodate a range of applications and are often used in low-pressure systems.

2. Material Composition Oil seals are typically made from various elastomers like nitrile rubber (NBR), fluoroelastomer (FKM), or silicone, depending on the application requirements. The percentages could also hint at the ratio of different materials used in the seal to enhance its performance in specific environments, such as high temperatures or chemical exposure.

Why Choose a Repair Kit?

Conclusion

Oil seals, often referred to as rotary seals or oil slingers, are devices used to seal rotating shafts or components in equipment that contain fluids, such as oils or greases. These seals are typically made from rubber, polyurethane, or other synthetic materials, which provide excellent resilience and wear resistance. The primary function of oil seals is to contain the lubricant within the system while simultaneously keeping contaminants out, thus maintaining optimal performance.

7. Reassemble Components Once the new seals are in place, reassemble the components in the reverse order of disassembly. Ensure that all parts fit snugly and are correctly aligned.