Hebei Hankai hub seals by size

The designation 14x24x6 refers to the dimensions of the oil seal in millimeters. The first number, 14, represents the inner diameter of the seal; the second number, 24, is the outer diameter; and the third number, 6, indicates the thickness of the seal. These specific measurements make the 14x24x6 oil seal compatible with various shafts and housings in machinery, allowing for efficient sealing.

Skeleton oil seals are widely used in various applications, including automotive, aerospace, and industrial machinery. In the automotive sector, they can be found in engines, transmissions, and differential components. Their ability to prevent oil leakage is vital for maintaining engine performance and longevity. Similarly, in aerospace applications, these seals are essential for ensuring that hydraulic and fuel systems operate efficiently without contamination.

These seals typically consist of an elastomeric material, such as rubber or polyurethane, combined with a metal casing that allows for better sealing against high-pressure environments. The combination of a flexible lip and a rigid outer body ensures optimal sealing and minimizes wear on the sealing surfaces.

1. Lubrication Retention The primary function of a grease seal is to retain the lubricating grease within the bearing. This grease is crucial for reducing friction, minimizing wear, and ensuring that the bearing operates smoothly. When grease escapes, the bearing can run dry, leading to overheating and potential failure.

1. Dimensions The numbers can indicate the dimensions of the seal. For instance, the first number may denote the inner diameter, the second, the outer diameter, and the third could refer to the width or height of the seal. These dimensions are critical for ensuring that the seal fits perfectly within the intended assembly, thereby maximizing effectiveness.