Oil seals, commonly known as rotary shaft seals, are devices that prevent the leakage of lubricants while keeping contaminants such as dirt and moisture out. High temperature variants are designed to operate effectively in environments where standard seals would typically fail due to thermal degradation. These seals are made from materials that can withstand elevated temperatures, such as silicone, fluoroelastomers (FKM), and polyurethane.
4. Remove Old Seals With the cylinder disassembled, you can now remove the old seals. Use a pick tool to gently pry out the seals from their grooves. Be cautious to avoid scratching the cylinder or piston surfaces. Clean the grooves thoroughly to remove any debris or residue.
2. Lubrication Ensure that wheel bearings are adequately lubricated. If the grease becomes contaminated or dries out, it can compromise the seals’ effectiveness and lead to bearing failure.
Understanding Agricultural Seals
The design of the lip is crucial; its profile allows it to make optimal contact with the shaft, creating a seal that can accommodate the shaft's rotation. Some rotary lip seals also include a dust lip or exclusion barrier, which helps protect the primary sealing lip from contaminants such as dirt and debris.
By following these guidelines and exercising diligence throughout the replacement process, you can ensure effective sealing component replacement while minimizing the risk of system failure and downtime. Remember to prioritize safety, accuracy, and adherence to best practices at every stage of the process.
