hydraulic cylinder kits

Evolution of the Seals Industry

Hydraulic shaft seals are specialized sealing devices designed to prevent the leakage of hydraulic fluid from the cylinder while keeping contaminants out. These seals provide a barrier between the moving shaft and the stationary part of the hydraulic system. They are essential for maintaining pressure, minimizing fluid loss, and ensuring smooth operation of hydraulic machinery.

One of the primary characteristics of high temperature oil seals is their ability to maintain flexibility and resilience at elevated temperatures. Traditional rubber seals may become brittle and lose their sealing capabilities when exposed to heat. In contrast, high temperature oil seals retain their mechanical properties, ensuring that they continue to perform their sealing function effectively even in harsh conditions. Typically, these seals can withstand temperatures ranging from 150°C to over 300°C, depending on the specific material used.

For the specification of galvanized wire, the galvanized wire produced by our factory can range from No.8 to No.22, which refers to the BWG standard, that is, from about 4mm to 0.7mm, which can basically cover the type required by customers. As for the raw material of galvanized wire, normally, we use Q195 mild steel, and some factories will also use SAE1006 or SAE1008. The following is the zinc coating, for galvanized wire, this thing is more important, the general zinc coating is about 50g/m2 to 80g/m2, some customers need high zinc galvanized wire, zinc coating can reach 200g/m2 to 360g/m2. The tensile strength of galvanized wire is usually 350n/m2 to 800n/m2. Then there is the packaging specification of galvanized wire. The specifications of small rolls of galvanized wire are 50kg/ roll, 100kg/ roll and 200kg/ roll. Of course, there are large rolls of galvanized silk, the weight can reach 300kg/ roll or 800kg/ roll.