Hebei Hankai hydraulic oil seal

3. Minimal Leakage Effective sealing is crucial in preventing fluid loss, which can lead to process inefficiencies and environmental hazards. High pressure rotary shaft seals are engineered to provide a tight seal that minimizes leakage, thus enhancing the overall efficiency of the machinery.

- Backup Rings Used to prevent the extrusion of the primary seals under high pressure, backup rings enhance the efficacy of rod and piston seals.

4. Remove Old Seals With the cylinder disassembled, you can now remove the old seals. Use a pick tool to gently pry out the seals from their grooves. Be cautious to avoid scratching the cylinder or piston surfaces. Clean the grooves thoroughly to remove any debris or residue.

The production process of large rolls of galvanized wire is a level of drawing, through the mold into a slightly smaller diameter than the original. And so on down to the desired length. One pull is not desirable, must be numbered, from coarse to fine is dependent on metal ductility. If it changes too much it just breaks. After drawing to a certain diameter, galvanized, so that the finished product.