40 80 10 oil seal

A typical hydraulic gear pump seal kit comprises several essential components

Additive manufacturing, commonly known as 3D printing, will continue to disrupt traditional manufacturing processes in the seals industry. With ongoing advancements in materials and printing technologies, 3D-printed seals offer unparalleled design flexibility, cost-effectiveness, and rapid prototyping capabilities, catering to diverse customer requirements and complex geometries.

In fact, iron wire has been widely used in our daily life, and it has very good performance. Iron wire production developed earlier because of its simple technology and wide application. Plastic spraying refers to the plastic powder, sprayed on the product of a surface treatment method. Plastic spraying is often referred to as electrostatic powder spraying, the use of electrostatic generator to make plastic powder charged, adsorbed on the surface of the iron plate, and then after 180 ~ 220℃ baking, so that the powder melt and adhere to the metal surface, plastic spraying products are used for indoor use of the box, paint film showing flat or matte effect.

Poor pretreatment before plating; Bath temperature is too low; Poor quality of additives or too many additives and organic impurities will cause poor bonding. The quality of additives also has an effect on coating foaming. Some additives react incompletely during synthesis and continue to polymerize during long-term storage or use. The additive tends to distort the crystal lattice and cause stress, causing the coating to bubble.