50x90x10 oil seal

The Importance of Oil Seals in Mechanical Applications

4. Enhance Efficiency By preventing leaks and contamination, oil seals optimize machinery performance, leading to reduced energy consumption and operational costs.

One of the main reasons why hydraulic motor seal kits are necessary is to prevent fluid leakage. The seals and O-rings in the kit create a tight barrier that prevents hydraulic fluid from escaping the system. If the seals are worn or damaged, fluid can leak out, leading to a loss of pressure and reduced performance. This can result in slower operation, increased energy consumption, and potential damage to other components in the hydraulic system. By replacing the seal kit regularly, you can avoid these issues and ensure that your hydraulic motor operates at its best.

Step 5 Install New Seals

All food businesses currently using titanium dioxide as a food additive have a legal responsibility to comply with the requirements of Regulation (EU) 2022/63, banning the use of titanium dioxide. The FSAI encourages food businesses to source suitable alternatives to titanium dioxide and start the process of reformulation now to ensure compliance in advance of the ban coming into force on 7 August 2022.

Un pigment apparenté, mais où le sulfate de baryum est remplacé par du sulfate de calcium, prend le nom de « sulphopone »

2: Clarification mechanism of coagulant

Chemical coagulation is a process in which chemical agents (coagulants) are added to water treatment to make colloidal dispersion system destabilize and agglomerate. In the coagulation process, small suspended particles and colloidal impurities are aggregated into larger solid particles to separate particulate impurities from water, which is called coagulation clarification.

After adding coagulant into water, colloidal particles and other small particles can be polymerized into larger flocs through the comprehensive action of mixing, coagulation and flocculation. The whole process of coagulation and flocculation is called coagulation.

(1) Destabilization and condensation of colloids

Adding electrolyte to water can compress the electric double layer and destabilize the colloid. The main mechanism is that the electric double layer of colloidal particles in water is compressed or neutralized by adding aluminum salt or iron salt coagulant. The coagulant and raw water are mixed rapidly and evenly, and a series of chemical reactions are produced to destabilize. This process takes a short time, generally about 1 min. Some cationic polymers can also play a role in the destabilization and condensation of colloids in water. These polymers have a long chain structure and positive charge in water. Their destabilization and condensation of colloids in water is due to the interaction of van der Waals force adsorption and electrostatic attraction.

(2) Flocculation and formation of floc (alum)

The particle size of the initial flocculate formed by colloid destabilization and coagulation in water is generally more than 1 m. at this time, Brownian motion can no longer push them to collide and form larger particles. In order to make the initial flocs collide with each other to form large flocs, it is necessary to input additional energy into the water to produce a velocity gradient. Sometimes it is necessary to add organic polymer flocculant into water, and the adsorption bridging effect of long chain molecules of flocculant is used to improve the probability of collision and adhesion. Flocculation efficiency usually increases with the increase of flocculate concentration and flocculation time.

Compared with polyaluminum chloride, polyaluminum chloride has the advantages of high density, fast settling speed and wide pH adaptability; the coagulation effect is less affected by temperature than that of polyaluminum sulfate; however, when adding ferric salt, it should be noted that when the equipment is not in normal operation, the iron ions will make the effluent color, and may pollute the subsequent desalination equipment.