The designation 14x22x5 refers to the dimensions of the oil seal a 14 mm inner diameter, a 22 mm outer diameter, and a 5 mm width. These measurements are crucial as they determine the seal's compatibility with various shafts and housings. The 14x22x5 oil seal is typically made from materials like rubber or polyurethane, which possess excellent resistance to wear, tear, and environmental factors.

4. Remove Old Seals With the cylinder disassembled, you can now remove the old seals. Use a pick tool to gently pry out the seals from their grooves. Be cautious to avoid scratching the cylinder or piston surfaces. Clean the grooves thoroughly to remove any debris or residue.

Understanding Hydraulic Shaft Seals

There are several signs that indicate a rear hub seal may be failing. One of the most common symptoms is a leak of oil around the rear wheels. This can often be seen as a puddle of oil forming underneath the car, or as oil splattered on the inside of the wheels. It is crucial to address this issue promptly, as leaking oil can not only damage the axle components but also pose a safety hazard due to reduced traction.