hydraulic oil seal types

Tools and Materials Needed

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

4. Integrated Hoses Certain steam cleaner models offer integrated hoses that are built into the machine, providing a compact design but may limit flexibility depending on the model.

The benefits of using spiral wire hoses are substantial, particularly when compared to traditional rubber hoses. Some of the key advantages include

The EN 857 standard was developed by the European Committee for Standardization (CEN) to ensure the reliability and safety of hydraulic hoses used across various industries. The designation '1SC' refers to one specific type of hydraulic hose within this standard. The '1' indicates a single spiral construction, while 'SC' denotes that it is a compact hose.

In the world of industrial operations, high-pressure hoses play a critical role. They are essential for the safe and efficient transfer of fluids in various applications, ranging from construction to agricultural and equipment maintenance. This article will explore the significance of high-pressure hoses, particularly those rated for 1% and 4% operational pressure, their construction, and their applications.