Hebei Hankai seal kit for pallet jack

Applications

   - Shut down the system: Before beginning the replacement procedure, ensure that the system is safely shut down to prevent accidents and injuries.

The designation 20x35x7 refers to the dimensions of the oil seal. The numbers represent the inner diameter (20 mm), outer diameter (35 mm), and the thickness (7 mm) of the seal. The design of an oil seal is critical, as it must fit precisely to ensure a proper seal and prevent the ingress of dirt, dust, or moisture. The choice of material used for these seals often includes rubber compounds that enhance flexibility and resilience. Common materials include nitrile rubber (NBR), fluorocarbon rubber (FKM), and silicone, each chosen based on the specific application and operating conditions.

2. Use Quality Fluids Utilizing the correct hydraulic fluid is essential. Incorrect fluid types can degrade seals over time, leading to leaks and loss of efficiency. Always refer to manufacturer specifications.

1, must often clean and scrub the stainless steel pet cage, keep the surface of the stainless steel pet cage clean, dry, can ensure the stainless steel pet cage bright every day.

Cold galvanized, generally speaking, do not need heating, galvanized amount is little, this galvanized parts are easy to fall off in wet environment. Hot dip galvanizing, also known as hot dip galvanizing, is to melt the zinc ingot at high temperature, put some auxiliary materials in, and then dip the metal structural parts into the galvanized groove, so that the metal members are attached to a layer of zinc layer. The advantage of hot dip galvanized is that its anticorrosion ability is strong, the adhesion and hardness of galvanized layer is better.

There are two varieties of steel grid plate is pressure welded steel grid plate and pressure lock steel grid plate, in many people’s eyes, these two products belong to the same variety, in fact, there are still great differences between them in many places.