Current location:Home > single acting piston seal >

single acting piston seal

2025-08-17 10:04
2025-08-17 09:34
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • Latest articles
    The spacing requirements for brick ties vary depending on the specific type of brick being used and the local building codesbrick tie spacing requirements. However, there are some general guidelines that can be followed to ensure proper installation. For example, tie wires should be spaced approximately every 16 inches (40 cm) along the length of the wall, while metal clips or bar ties may be spaced every 8 to 12 inches (20 to 30 cm). It is also important to ensure that the ties are installed at the correct depth within the mortar joint, usually about 1/2 to 3/4 inch (1.3 to 1.9 cm) from the face of the brick.
    Moreover, the weld mesh acts as a robust skeletal framework that enhances the bond between the concrete and the reinforcementweld mesh reinforcement. This synergistic relationship ensures that the forces applied to the structure are effectively transferred and managed, reducing the risk of collapse or failure under heavy loads.