pump seal kit

3. Disassemble the Cylinder Once the boom cylinder is detached, carefully disassemble it. Remove the end caps, which may require a specific tool or technique depending on your excavator model. Take care not to damage any internal components.

The performance of a hydraulic seal largely depends on the materials used in its construction. Common materials include

- Piston Seals These are used to create a seal between the piston and the cylinder wall. They prevent hydraulic fluid from leaking as the piston moves within the cylinder.

4. Gaskets Gaskets are essential for sealing joints between different components of the hydraulic system. They prevent fluid leaks and maintain system integrity.

The diameter of cold-drawn wire should conform to the contract, check whether the amount of zinc meets the requirements of the contract, check the tensile strength, and ask the factory to provide the corresponding inspection report. The wire factory introduces that the weight of a single coil of wire of different specifications should not be lower than the volume weight required by the contract, and record the value. No contacts are generated for each reel of wire. If there are contacts, no more than three contacts are generated for each reel. Each contact should be smooth surface treatment, the wire can not be pulled off from the contact, in line with customer packaging requirements.

Poor pretreatment before plating; Bath temperature is too low; Poor quality of additives or too many additives and organic impurities will cause poor bonding. The quality of additives also has an effect on coating foaming. Some additives react incompletely during synthesis and continue to polymerize during long-term storage or use. The additive tends to distort the crystal lattice and cause stress, causing the coating to bubble.

The wire used for wire mesh is made of low carbon steel wire, medium carbon steel wire, high carbon steel wire, stainless steel wire and other materials woven or welded. Production technology: general braid, embossed braid and spot welding type. If the steel wire as the material, after the equipment processing into a network, so called wire mesh.