seal kits

2. SKF Group - Founded in Sweden, SKF is a global leader in bearings and seals. They offer a wide range of oil seals designed for different applications, backed by extensive research and development efforts. Their commitment to quality and sustainability has made them a preferred choice among manufacturers.

Types of Hydraulic Ram Oil Seals

- Oil and Gas Essential in drilling and production equipment where high pressures are commonplace.

Máy nén khí di động diesel mang lại nhiều lợi ích quan trọng, bao gồm

2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.

3. Woodworking Carpenters and woodworkers use spiral drill bits for their ability to create clean and precise holes in various types of wood. The smooth finish left by these bits is often essential for aesthetic purposes.

Conclusion

- KSB Group A global leader in pump manufacturing, KSB produces a range of pumps for different applications, including those for handling abrasive and high-temperature materials. Their expertise in engineering ensures that their vertical slag pumps meet industry standards for safety and efficiency.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Conclusion