Hebei Hankai hub oil seals axle seals

2. Keep Contaminants Out Dust, dirt, and other foreign particles can cause severe damage to machinery. Oil seals act as barriers, keeping these contaminants from entering and prolonging the life of the equipment.

Wheel bearing grease seals, often referred to simply as grease seals, are fitted between the stationary and rotating parts of a wheel bearing assembly. They create a barrier that prevents grease from leaking out while simultaneously keeping dirt, dust, moisture, and other contaminants at bay. Typically made from durable materials such as rubber or synthetic compounds, these seals are engineered to withstand high temperatures and pressures, which can occur during operation.

Design and Construction

Good galvanized wire, plating thickness of 3- 4 mm, zinc adhesion should be less than 460 grams/m, that is, the average thickness of zinc layer is not less than 65 microns. When the thickness of plated parts is greater than 4 mm, the zinc adhesion should not be less than 610 g/m, that is, the average thickness of zinc layer should not be less than 86 microns. Standard galvanized wire coating must be uniform, galvanized layer basically uniform with copper sulfate solution test etching five times no dew iron. For standard galvanized wire coating adhesion requirements, the zinc layer of plated parts should be firmly combined with the basic metal and have enough adhesion strength, after hammer test does not fall off, not convex.