tcn type oil seal

1. Seals The primary function of seals is to prevent hydraulic fluid from leaking out of the cylinder. The most common types are O-rings, lip seals, and piston seals. Each type serves different purposes and is made from materials suited for varying pressure and temperature conditions.

Oil seals, commonly known as rotary shaft seals, are devices that prevent the leakage of lubricants while keeping contaminants such as dirt and moisture out. High temperature variants are designed to operate effectively in environments where standard seals would typically fail due to thermal degradation. These seals are made from materials that can withstand elevated temperatures, such as silicone, fluoroelastomers (FKM), and polyurethane.

2. Material Composition Oil seals are typically made from various elastomers like nitrile rubber (NBR), fluoroelastomer (FKM), or silicone, depending on the application requirements. The percentages could also hint at the ratio of different materials used in the seal to enhance its performance in specific environments, such as high temperatures or chemical exposure.